reset station assoc-info ap-offline-record

Function

The reset station assoc-info ap-offline-record command deletes information about STAs that connect to the APs in fault state.

Format

reset station assoc-info ap-offline-record { all | { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }

Parameters

Parameter	Description	Value
all	Deletes information about all STAs that connect to APs in fault state from the AC.	-
ap-name ap-name	Clears information about STAs that go online on the AP with a specified name in fault state.	The AP name must exist.
ap-id ap-id	Clears information about STAs that go online on the AP with a specified ID in fault state.	The AP ID must exist.
radio radio-id	Deletes information about STAs that connect to the specified radio of the AP in fault state.	The radio ID must exist.

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Before collecting statistics on the STAs that connect to the APs in fault state within a specific period, run the reset station assoc-info ap-offline-record command to delete the original STA information.

Prerequisites

The APs in fault state have been enabled to allow access of new STAs using the keep-service enable allow new-access command.

Function

The deleted STA information cannot be restored. Exercise caution when you run the reset station assoc-info ap-offline-record command.

Example

# Delete information about all STAs that connect to APs in fault state from the AC.

<HUAWEI> reset station assoc-info ap-offline-record all