The reset traffic-statistics vsi name peer remote-site command clears the statistics about the public traffic on the Kompella VPLS PW in the specified VSI.
| Parameter | Description | Value |
|---|---|---|
| name vsi-name | Specifies the name of a VSI. | The value is an existing VSI. |
| peer peer-address | Specifies the peer IP address of the PW. | - |
| remote-site site-id | Specifies the remote site ID. | The value is an integer that ranges from 0 to 65534. |
Usage Scenario
After the Kompella VPLS configuration is complete, you can run the display traffic-statistics vsi peer remote-site command to view the statistics about the traffic on the PW. To view the statistics about the traffic in a specified period, you can run the reset traffic-statistics vsi name peer remote-site command to clear the previous statistics.
Prerequisites
The traffic statistics function has been enabled using the traffic-statistics peer remote-site enable (Kompella) command in the VSI-BGP view.
Precautions
The reset traffic-statistics vsi name peer remote-site command is valid only in Kompella VPLS.
After you run the reset traffic-statistics vsi name peer remote-site command, statistics about the traffic on the corresponding Kompella VPLS PW are cleared.