reset virtual-cable-test

Function

The reset virtual-cable-test command deletes cable test results on an interface.

The following switch models and interfaces do not support this command:

Multi-GE interfaces on the S5720-28X-PWH-LI-AC, S5732-H24UM2CC, S5732-H48UM2CC, S6720-32C-SI-AC, S6720-32C-SI-DC, S6720-32C-PWH-SI-AC, S6720-32C-PWH-SI, S6720-52X-PWH-SI, S6720-56C-PWH-SI-AC, and S6720-56C-PWH-SI
XGE electrical interfaces on the ES5D21X08T00 card

reset virtual-cable-test { interface-type interface-number | all }

Parameter	Description	Value
interface-type interface-number	Deletes cable test results on a specified interface. interface-type specifies an interface type. interface-number specifies an interface number.	-
all	Deletes cable test results on all interfaces.	-

All views

3: Management level

Usage Scenario

Before conducting a cable test on an electrical interface, you can use this command to delete the previous test results.

Precautions

The cable test results cannot be restored after being cleared. Exercise caution before clearing the statistics.

# Delete cable test results on GE0/0/1.

<HUAWEI> reset virtual-cable-test gigabitethernet 0/0/1