reset vxlan statistics
Format
reset vxlan statistics source source-ip-address peer peer-ip-address [ vni vni-id ]
reset vxlan statistics source source-ipv6-address peer peer-ipv6-address [ vni vni-id ]
Only the S6730-S, S6730S-S, S5732-H, S5731-S, S5731S-S, S5731S-H, S5730-HI, S6730-H, S6730S-H, S5731-H, and S6720-HI support the source and peer parameters configured as IPv6 address.
Parameters
| Parameter | Description | Value |
|---|---|---|
source source-ip-address |
Specifies the IPv4 address of the source VTEP. |
The value is in dotted decimal notation. |
peer peer-ip-address |
Specifies the IPv4 address of the destination VTEP. |
The value is in dotted decimal notation. |
source source-ipv6-address |
Specifies the IPv6 address of the source VTEP. |
The address is a 32-bit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
peer peer-ipv6-address |
Specifies the IPv6 address of the destination VTEP. |
The address is a 32-bit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
vni vni-id |
Specifies a VNI ID. |
The value is an integer that ranges from 1 to 16777215. |
Usage Guidelines
Usage Scenario
Before you collect VXLAN tunnel packet statistics within a specific period, run the reset vxlan statistics command to clear the existing statistics to ensure statistics accuracy.
Precautions
Packet statistics cannot be restored after you clear them; therefore, exercise caution before you run the reset vxlan statistics command.