reset wlan ble site-info

Function

The reset wlan ble site-info command deletes information about BLE devices stored on an AC.

Format

reset wlan ble site-info { all | mac-address mac-address }

Parameters

Parameter	Description	Value
all	Deletes information about all BLE devices.	-
mac-address mac-address	Deletes information about the BLE device with the specified MAC address from the device list on the AC.	The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When the remaining aging time of BLE devices is long and some BLE devices are not in the current WLAN coverage area, but entries on the AC still exist, you can run this command to delete information about these BLE devices.

Precautions

Deleted information about BLE devices cannot be recovered. If the aging time of a BLE device is zero, information about the BLE device is automatically deleted from the device list on the AC.

Example

# Delete information about all BEL devices from the AC.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] reset wlan ble site-info all