reset wlan dynamic-blacklist

Function

The reset wlan dynamic-blacklist command deletes information about devices in the dynamic blacklist.

reset wlan dynamic-blacklist { ap-id ap-id | ap-name ap-name | mac-address mac-address | all }

Parameter	Description	Value
ap-id ap-id	Deletes the dynamic blacklist information reported by the AP with a specified ID.	The AP ID must exist.
ap-name ap-name	Deletes the dynamic blacklist information reported by the AP with a specified name.	The AP name must exist.
mac-address mac-address	Deletes the device with a specified MAC address from the dynamic blacklist.	The MAC address must exist.
all	Deletes all information in the dynamic blacklist.	-

All views

3: Management level

Usage Scenario

The reset wlan dynamic-blacklist command is applicable to the following scenarios:

To re-collect the dynamic blacklist information, run the reset wlan dynamic-blacklist all command to delete all information in the dynamic blacklist. After that, the AC re-collects the information.
To remove an authorized device from the dynamic blacklist, run the reset wlan dynamic-blacklist mac-address command to remove the MAC address of the device from the dynamic blacklist. After that, information sent from the device is not rejected.

Precautions

Running the reset wlan dynamic-blacklist command affects packet receiving of APs. Exercise caution when running this command.

# Delete the device with MAC address 78AC-C0C1-C1FC from the dynamic blacklist.