rip

Function

The rip command starts the specified RIP in the system view.

The undo rip command stops the specified RIP process.

By default, no RIP process is started.

Format

rip [ process-id ] [ vpn-instance vpn-instance-name ]

undo rip process-id

Parameters

Parameter	Description	Value
process-id	Specifies the ID of a RIP process.	The value is an integer that ranges from 1 to 65535. The default value is 1.
vpn-instance vpn-instance-name	Specifies the name of a VPN instance.	The value must be an existing VPN instance name.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If no VPN instance is specified, a RIP process is run globally or in the default VPN instance. Before configuring each global RIP parameter, you need to start RIP. This restriction is not applicable when you configure interface-related parameters.

Example

# Start RIP process 1.

<HUAWEI> system-view
[HUAWEI] rip 1
[HUAWEI-rip-1]

# Start RIP process 100 in the VPN instance named abc.

<HUAWEI> system-view
[HUAWEI] rip 100 vpn-instance abc
[HUAWEI-rip-100]