rip mib-binding

Function

The rip mib-binding command sets the binding between the Management Information Base (MIB) and RIP process ID, and specifies the ID of the RIP process that receives SNMP requests.

The undo rip mib-binding command cancels the binding.

By default, there is no binding between the Management Information Base and RIP process ID.

Format

rip mib-binding process-id

undo rip mib-binding

Parameters

Parameter	Description	Value
process-id	Specifies the ID of a RIP process.	The value is an integer ranging from 1 to 65535. The default value is 1.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

All SNMP requests are sent to the bound RIP process.

Prerequisites

A RIP process has been created using the rip command.

Example

# Configure RIP process 100 to receive SNMP requests.

<HUAWEI> system-view
[HUAWEI] rip 100
[HUAWEI-rip-100] quit
[HUAWEI] rip mib-binding 100