rrpp ring-group

Function

The rrpp ring-group command creates an RRPP ring group and enters the RRPP ring group view.

The undo rrpp ring-group command deletes an RRPP ring group.

By default, the RRPP ring group is not created.

Format

rrpp ring-group ring-group-id

undo rrpp ring-group ring-group-id

Parameters

Parameter	Description	Value
ring-group ring-group-id	Specifies the ID of an RRPP ring group.	The value is an integer that ranges from 1 to 16.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can create an RRPP ring group to reduce the number of Edge-Hello packets, improving system performance.

Precautions

A maximum of 16 ring groups are supported on each node.

When running the rrpp ring-group command to add a subring to a ring group, add the subring to the ring group on the assistant edge node and then on the edge node.

To delete a ring group, delete it on the edge node first, and then perform the same operation on the assistant edge node.

Example

# Create Ring Group 1 and enter its view.

<HUAWEI> system-view
[HUAWEI] rrpp ring-group 1
[HUAWEI-rrpp-ring-group1]