rssi-diff-gap

Function

The rssi-diff-gap command sets the RSSI difference threshold for members in a static load balancing group.

The undo rssi-diff-gap command restores the default RSSI difference threshold of members in a static load balancing group.

By default, the RSSI difference threshold of members in a static load balancing group is 5 dB.

Format

rssi-diff-gap diff-gap-threshold

undo rssi-diff-gap

Parameters

Parameter	Description	Value
diff-gap-threshold	Specifies the RSSI difference threshold of members in a static load balancing group.	The value is an integer that ranges from 0 to 15, in dB.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To achieve load balancing, an AP may steer connected STAs to other APs with smaller RSSIs. If the RSSI of the AP with which a STA currently associates minus the RSSI of the target AP is larger than the specified RSSI difference threshold, the STA is denied from being steered to the target AP; otherwise, the STA can be steered to the target AP.

Precautions

If STAs have high signal quality deterioration tolerance for the target AP, you can set a larger RSSI difference threshold to achieve better load balancing effect. If STAs have low signal quality deterioration tolerance for the target AP, set a smaller RSSI difference threshold. You are advised to retain the default value.

Example

# Set the RSSI difference threshold for members in a static load balancing group to 6 dB.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] rssi-diff-gap 6