sac-profile (system view)

Function

The sac-profile command creates an SAC profile and displays its view, or directly displays the view of an existing SAC profile.

The undo sac-profile command deletes an SAC profile.

By default, no SAC profile is configured on a device.

Only the S5731-S, S5731S-S, S5731-H, and S5731S-H support this command.

Format

sac-profile name profile-name

undo sac-profile name profile-name

Parameters

Parameter	Description	Value
name profile-name	Indicates the name of an SAC profile.	The value is a string of 1 to 35 case-insensitive characters without spaces. If the string is enclosed in double quotation marks ("), the string can contain spaces.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure an SAC profile and perform QoS configurations for users using the profile, for example, re-marking internal priorities based on user ACLs.

Follow-up Procedure

Set parameters for the SAC profile, for example, internal priority re-marked based on a user ACL.
Apply the SAC profile in the specified view. For example, apply an SAC profile in the service scheme view to re-mark the internal priority of packets based on a user ACL in the SAC profile. The device then schedules packets based on the re-marked priority.

Precautions

A device supports a maximum of 31 SAC profiles.

Example

# Create an SAC profile named huawei and enter the SAC profile view.

<HUAWEI> system-view
[HUAWEI] sac-profile name huawei
[HUAWEI-sac-profile-huawei]