scan-disable

Function

The scan-disable command disables the air scan function.

The undo scan-disable command enables the air scan function.

By default, the air scan function is enabled.

Format

scan-disable

undo scan-disable

Parameters

None

Views

Air scan profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When an AP does not require air scan, you can run the scan-disable command to disable the air scan function. The AP then will stop scanning surrounding wireless signals.

Precautions

Disabling air scan will affect scanning functions, such as radio calibration, spectrum analysis, terminal location, WIDS, smart roaming, and DFS smart selection.

Example

# Disable the air scan function.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] air-scan-profile name huawei
[HUAWEI-wlan-air-scan-prof-huawei] scan-disable
Warning: This operation will affect scanning-related services such as radio calibration, spectrum analysis, terminal location, WIDS 
function, smart roaming and DFS smart selection.Continue? [Y/N]y