section (IP address pool view)

Function

The section command configures the IP address segment in an IP address pool.

The undo section command deletes the configured IP address segment in an IP address pool.

By default, the IP address segment in an IP address pool is not configured.

section section-id start-address [ end-address ]

undo section section-id

Parameter	Description	Value
section-id	Specifies the ID of the address segment in the IP address pool.	The value is an integer that ranges from 0 to 255.
start-address	Specifies the start IP address of the address segment.	The value is in dotted decimal notation.
end-address	Specifies the end IP address of the address segment. NOTE: The end IP address must be larger than the start IP address. If the end IP address is not entered, there is only one address in the address segment.	The value is in dotted decimal notation.

IP address pool view

2: Configuration level

An IP address pool consists of one or more IP address segments. The IP addresses on each address segment cannot overlap.

# Configure an IP address segment 10.1.1.10-10.1.1.15 with the ID 0 for the IP address pool abc.

<HUAWEI> system-view
[HUAWEI] ip pool abc
[HUAWEI-ip-pool-abc] section 0 10.1.1.10 10.1.1.15