security-profile (WLAN view)

Function

The security-profile command creates a security profile or enters the security profile view.

The undo security-profile command deletes a security profile according to the ID or name.

By default, security profiles default, default-wds and default-mesh are available in the system.

Format

security-profile name profile-name

undo security-profile { all | name profile-name }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a security profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all security profiles. NOTE: Security profiles default, default-wds and default-mesh cannot be deleted.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

You can run this command to configure access security. A security profile must be configured before you specify an authentication mode in the profile. To delete a security profile, run the undo security-profile command.

The system configures the new profile, the default value is no authentication and no encryption.

Example

# Configure a security profile named p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1]