sender-address

Function

The sender-address command configures the source IP address in the multi-hop PW scenario.

The undo sender-address command restores the default setting.

By default, no source IP address is configured.

Format

sender-address ipv4 ip-address

undo sender-address

Parameters

Parameter	Description	Value
ipv4 ip-address	Specifies a source IPv4 address.	-

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When PWE3 ping is performed in the multi-hop PW scenario, and the lsp-version is rfc4379, the sender-address command specifies a source IP address. The value is a routable address on the same public network with the address of the destination PE. Usually, the source IP address is the address of the adjacent SPE or UPE.

Precautions

After the sender-address command is run, the LSP version cannot be set to draft6.

Example

# Set the source IP address of the PWE3 ping test instance in the multi-hop PW scenario to 10.1.1.1.

<HUAWEI> system-view

[HUAWEI] nqa test-instance user test

[HUAWEI-nqa-user-test] test-type pwe3ping

[HUAWEI-nqa-user-test] lsp-version rfc4379

[HUAWEI-nqa-user-test] sender-address ipv4 10.1.1.1