service-experience-analysis sip-snooping port

Function

The service-experience-analysis sip-snooping port command sets the SIP listening port number.

The undo service-experience-analysis sip-snooping port command restores the default SIP listening port number.

The default SIP listening port number is 5060.

Format

service-experience-analysis sip-snooping port port-number

undo service-experience-analysis sip-snooping port

Parameters

Parameter	Description	Value
port-number	Specifies the SIP listening port number.	The value is an integer that ranges from 1 to 65535.

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

When the SIP (eSpace) service runs on a WLAN, you can enable the SEA function so that the device reports performance statistics about SIP traffic (such as IP addresses and port numbers of calling and called parties, and call quality data) to CampusInsight. In this manner, CampusInsight can analyze network performance and locate faults.

You can run this command to set the SIP listening port number.

Before setting the SIP listening port number, enable the SEA function using the service-experience-analysis enable command.

Example

# Set the SIP listening port number to 5080.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] vap-profile name huawei
[HUAWEI-wlan-vap-prof-huawei] service-experience-analysis sip-snooping port 5080