set device ac-output 24v enable

Function

The set device ac-output 24v enable command enables the 24 V AC output function on a switch.

The undo set device ac-output 24v enable command disables the 24 V AC output function on a switch.

By default, the 24 V AC output function is enabled on switches.

Only the S5720I-6X-PWH-SI-AC and S5735-S-I support this command.

Format

set device ac-output 24v enable

undo set device ac-output 24v enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If PDs require AC power supply, enable the AC output function on the switch.

Precautions

When the sum of the PoE power, DC output power, and AC output power on the switch is more than 150000 mW, the switch restarts.

Example

# Enable the 24 V AC output function on a switch.

<HUAWEI> system-view
[HUAWEI] set device ac-output 24v enable 
Warning: After this command is excuted, the 24V AC output will be enabled. Continue? [Y/N]:y
Warning: After the 24V AC output is enabled, the switch will reboot if the total power of PoE power, DC output power and AC output power exceed 150000mW. Continue? [Y/N]:y