set power manage interval

Function

The set power manage interval command sets the period during which the awakening port status is probed continuously.

The undo set power manage interval command restores the default period during which the awakening port status is probed continuously.

By default, the period is 20 minutes.

Only the S5720-28P-SI-AC, S5720-28X-SI-AC, S5720-28X-SI-DC, S5720-52P-SI-AC, S5720-52X-SI-DC, and S5720-52X-SI-AC in the S5720-SI series, and the S5735-S, S5735-S-I, S5735S-S, S5735-L, S5735S-L, S5735S-L-M, and S5720S-SI series switches support the sleep mode.

Format

set power manage interval interval-time

undo set power manage interval

Parameters

Parameter	Description	Value
interval-time	Specifies the period during which the awakening port status is probed continuously.	The value is an integer ranging from 5 to 60, in minutes.

Views

System view

Default Level

3: Management level

Usage Guidelines

When the device does not enter the dormancy state in the specified time range, the device continuously probes the status of all awakening ports. The device enters the dormancy state when the device does not probe any awakening port in Up state within the default 20 minutes. Otherwise, the device continues to probe the awakening ports status.

If no time range is applied to the device, the device probes the status of all awakening ports all round the clock. By default, the device enters the dormancy state when the device does not probe any awakening port in Up state within 20 minutes.

In a stack, the set power manage interval command cannot set the period during which the awakening port status is detected continuously. However, you can use the undo set power manage interval command to delete the configuration in standalone mode.

Example

# Set the period during which the awakening port status is probed continuously to 10 minutes.

<HUAWEI> system-view
[HUAWEI] set power manage interval 10
[HUAWEI] quit
<HUAWEI> save