set power manage non-awaken-port

Function

The set power manage non-awaken-port command configures a port as a non-awakening port.

The undo set power manage non-awaken-port command restores a non-awakening port to be an awakening port.

By default, all ports are awakening ports.

Only the S5720-28P-SI-AC, S5720-28X-SI-AC, S5720-28X-SI-DC, S5720-52P-SI-AC, S5720-52X-SI-DC, and S5720-52X-SI-AC in the S5720-SI series, and the S5735-S, S5735-S-I, S5735S-S, S5735-L, S5735S-L, S5735S-L-M, and S5720S-SI series switches support the sleep mode.

Format

set power manage non-awaken-port interface { interface-type interface-number1 [ to interface-type interface-number2 ] } &<1-10>

undo set power manage non-awaken-port interface { interface-type interface-number1 [ to interface-type interface-number2 ] } &<1-10>

Parameters

Parameter	Description	Value
interface { interface-type interface-number1 [ to interface-type interface-number2 ]	Specifies the type and number of an interface: interface-type specifies the type of the interface. interface-number1 specifies the number of the first interface. interface-number2 specifies the number of the second interface.	-

Views

System view

Default Level

3: Management level

Usage Guidelines

You can use the set power manage non-awaken-port command to configure some ports as non-awakening ports so that these ports do not affect device dormancy and awakening. This is because device dormancy and awakening depend on the awakening port status.

In a stack, the set power manage non-awaken-port command cannot configure a port as a non-awakening port. However, you can use the undo set power manage non-awaken-port command to delete the configuration in standalone mode.

Example

# Configure interfaces GigabitEthernet0/0/1 to GigabitEthernet0/0/5 as non-awakening interfaces.

<HUAWEI> system-view
[HUAWEI] set power manage non-awaken-port interface gigabitethernet 0/0/1 to gigabitethernet 0/0/5
Info: Succeeded in setting the configuration.
[HUAWEI] quit
<HUAWEI> save