The set said-node disable command disables SAID nodes.
The undo set said-node disable command enables SAID nodes.
By default, all SAID nodes are enabled.
set said-node { all | said-name &<1-6> } disable
undo set said-node { all | said-name &<1-6> } disable
Parameter |
Description |
Value |
|---|---|---|
all |
Indicates all SAID nodes. |
- |
said-name |
Specifies an SAID node. |
The value depends on the device configuration. A maximum of six SAID nodes can be configured at a time. If you need to configure more than six SAID nodes, run the set said-node disable command multiple times. |
Usage Scenario
The System of Active Immunization and Diagnosis (SAID) is an intelligent fault diagnosis system that automatically diagnoses and rectifies some faults by simulating human operations in troubleshooting. The SAID system has multiple SAID nodes, which detect, diagnose, and rectify faults of multiple modules. However, if a node processes a large number of services, the processing efficiency of other nodes is affected. In this case, run this command disable this node.
Precautions
If some cards do not support a specific SAID node and no cards that support this SAID node are installed on the device, the device displays a message, indicating that the device does not support this SAID node.