Using the set save-configuration command, you can enable automatic saving of configurations.
Using the undo set save-configuration command, you can disable automatic saving of configurations.
By default, automatic saving of configurations is not enabled.
set save-configuration nochange-time nochange-time
undo set save-configuration nochange-time [ nochange-time ]
| Parameter | Description | Value |
|---|---|---|
| nochange-time nochange-time | Specifies a period and configures the system to automatically save configurations if no configurations are changed over the specified period. | The value is an integer ranging from 30 to 43200, in minutes. The default value is 30. |
If nochange-time nochange-time is specified in the command, the system automatically saves configurations if no configuration changes in the period specified by nochange-time.
If the interval from the time of the last configuration to the current time is shorter than the set interval, the system cancels the current automatic saving operation.