shutdown (BFD session view)

Function

The shutdown command enables the BFD session to enter the AdminDown state.

The undo shutdown command enables a BFD session.

By default, a BFD session is enabled.

shutdown

undo shutdown

None

BFD session view

2: Configuration level

Usage Scenario

The shutdown command enables the BFD session to enter the AdminDown state.

Prerequisites

A BFD session has been created.

Precautions

To modify the configuration of a BFD session, run the shutdown command to disable the BFD session. After the configuration is modified successfully, run the undo shutdown command to enable the BFD session again.
To disable a BFD session without affecting the upper-layer application, run the shutdown command to enable the BFD session to enter the AdminDown state.
If a BFD session is associated with an interface, the status of the BFD session is not reported to the interface when the BFD session is shut down.

# Stop the BFD session atoc.

<HUAWEI> system-view
[HUAWEI] bfd atoc
[HUAWEI-bfd-session-atoc] shutdown