shutdown (AP wired port link profile view)

Function

The shutdown command shuts down an AP's wired interface.

The undo shutdown command enables an AP's wired interface.

By default, an AP's wired interface is enabled.

Format

shutdown

undo shutdown

Parameters

None

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If malicious users launch attacks to the network through an AP's wired interface, the administrator can deliver the shutdown command on the AC to shut down the interface.

Precautions

Data frames may be lost if you shut down an interface during data transmission. Exercise caution when you use the shutdown command.

The shutdown command still takes effect after an AP is restarted.

The shutdown command takes effect only on AP's wired interfaces working in endpoint or middle mode but not on those working in root mode.

Example

# Shut down the AP's wired interface GE0.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] port-link-profile name port-link1
[HUAWEI-wlan-port-link-prof-port-link1] shutdown
Warning: This command does not take effect for root interfaces.
[HUAWEI-wlan-port-link-prof-port-link1] quit
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] port-link-profile port-link1
[HUAWEI-wlan-wired-port-wired-port1] quit
[HUAWEI-wlan-view] ap-group name ap-group1
[HUAWEI-wlan-ap-group-ap-group1] wired-port-profile wired-port1 gigabitethernet 0