slave switchover { disable | enable }

Function

The slave switchover { disable | enable } command enables or disables forcible master/slave switchover.

undo slave switchover disable command enables forcible master/slave switchover.

By default, master/slave switchover is enabled.

Devices that do not support the stack function or do not have the stack function enabled do not support this function.

Format

slave switchover { disable | enable }

undo slave switchover disable

Parameters

Parameter	Description	Value
disable	Disables forcible master/slave switchover.	-
enable	Enables forcible master/slave switchover.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The slave switchover command takes effect only after forcible master/slave switchover is enabled. If forcible master/slave switchover is disabled, the slave switchover command does not take effect.

Example

# Disable forcible master/slave switchover.

<HUAWEI> system-view
[HUAWEI] slave switchover disable