smart-link enable

Function

The smart-link enable command enables a Smart Link group.

The undo smart-link enable command disables a Smart Link group.

By default, a Smart Link group is disabled.

Format

smart-link enable

undo smart-link enable

Parameters

None

Views

Smart Link group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A Smart Link group takes effect and blocks the slave interface only after it is enabled. After the Smart Link group is disabled, the slave interface is unblocked.

After creating a Smart Link group and adding interfaces to the group, you must enable the Smart Link group to make it effective.

Precautions

After a Smart Link group is enabled, the slave interface is blocked only if the master and slave interfaces are both in Up state.

Example

# Enable Smart Link group 1.

<HUAWEI> system-view
[HUAWEI] smart-link group 1
[HUAWEI-smlk-group1] smart-link enable