smi-server

Function

The smi-server command creates and displays the switch maintenance insight (SMI) view.

The undo smi-server command deletes the SMI view.

By default, no SMI view is created on a switch.

Format

smi-server

undo smi-server

Parameters

None

Views

NETCONF view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The switch needs to interconnect with CampusInsight to implement intelligent video O&M. You can run the smi-server command in the NETCONF view to enter the SMI view, and configure the IP address and port number used by connected CampusInsight in the SMI view.

Follow-up Procedure

Run the server ip-address (SMI view) command to configure the IPv4 address and port number of CampusInsight.

Precautions

Deleting the SMI view using the undo smi-server command will delete all intelligent video O&M configurations from the switch. Therefore, exercise caution when deleting the SMI view.

Example

# Create and display the SMI view.

<HUAWEI> system-view
[HUAWEI] netconf
[HUAWEI-netconf] smi-server
[HUAWEI-netconf-smi-server]