snmp-agent trap enable eoam-1ag (upgrade-compatible command)

Function

The snmp-agent trap enable eoam-1ag command enables the trap function for the Eoam-1ag module.

By default, the trap function is disabled for the Eoam-1ag module.

snmp-agent trap enable eoam-1ag

None

System view

3: Management level

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After an upgrade, this command is no longer supported, and it is replaced by the snmp-agent trap enable feature-name eoam-1ag command.