snmp-agent trap enable feature-name arp

Function

The snmp-agent trap enable feature-name arp command enables the trap function for the ARP module.

The undo snmp-agent trap enable feature-name arp command disables the trap function for the ARP module.

By default, the trap function is enabled for the ARP module.

Format

snmp-agent trap enable feature-name arp [ trap-name trap-name ]

undo snmp-agent trap enable feature-name arp [ trap-name trap-name ]

Parameters

Parameter	Description	Value
trap-name trap-name	Specifies the trap for an event of the ARP module.	hwethernetarpspeedlimitalarm: indicates that the rate of ARP packets exceeds the upper limit. hwethernetarpthresholdexceedalarm: indicates that the number of ARP entries exceeds threshold. hwethernetarpthresholdresumealarm: indicates that the hwethernetarpthresholdexceedalarm trap is cleared. hwethernetarpipconflictevent: indicates that IP addresses conflict.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If trap-name is not specified when you run the snmp-agent trap enable feature-name arp command, all the trap functions of the ARP module are enabled.

Example

# Enable the function of the trap indicating that the rate of ARP packets exceeds the upper limit.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name arp trap-name hwethernetarpspeedlimitalarm