snmp-agent trap enable feature-name efm

Function

The snmp-agent trap enable feature-name efm command enables the trap function for the EFM module.

The undo snmp-agent trap enable feature-name efm command disables the trap function for the EFM module.

By default, the trap function is disabled for the EFM module.

Format

snmp-agent trap enable feature-name efm [ trap-name { nonthreshold | threshold | nonthredholdrecovery | dyinggasp | loopbackfailed } ]

undo snmp-agent trap enable feature-name efm [ trap-name { nonthreshold | threshold | nonthredholdrecovery | dyinggasp | loopbackfailed } ]

Parameters

Parameter	Description	Value
trap-name	Enables or disables the trap function for the specified event.	-
nonthreshold	Enables the device to send a trap when a non-threshold crossing event occurs.	-
threshold	Enables the device to send a trap when a threshold crossing event occurs.	-
nonthredholdrecovery	Enables the device to send a trap when a non-threshold fault is rectified.	-
loopbackfailed	Enables the device to send a trap when loopback fails.	-
dyinggasp	Enables the device to send a trap when a remote Dying Gasp event occurs.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

You can specify trap-name to enable the trap function for one or more events.

Example

# Enable the device to send a trap when a non-threshold crossing event occurs.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name efm trap-name nonthreshold