snmp-agent trap enable (upgrade-compatible command)

Function

The snmp-agent trap enable command enables a specified trap for a specified feature.

The undo snmp-agent trap enable command disables a specified trap for a specified feature.

The default configuration of the snmp-agent trap enable command can be checked using the display snmp-agent trap all command.

snmp-agent trap enable feature-name

undo snmp-agent trap enable feature-name

Parameter	Description	Value
feature-name	Specifies the name of the feature that generates traps.	-

System view

3: Management level

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.