snmp-agent trap enable feature-name ipv6

Function

The snmp-agent trap enable feature-name ipv6 command enables the trap function for the IPv6 module.

The undo snmp-agent trap enable feature-name ipv6 command disables the trap function for the IPv6 module.

By default, the trap function is enabled for the IPv6 module.

snmp-agent trap enable feature-name ipv6 [ trap-name ipv6ifstatechange ]

undo snmp-agent trap enable feature-name ipv6 [ trap-name ipv6ifstatechange ]

Parameter	Description	Value
trap-name	Enables the traps of IPv6 events of specified types.	-
ipv6ifstatechange	Enables the trap function in case that the IPv6 protocol status on an interface is changed.	-

System view

2: Configuration level

To enable the traps of one or more events, you can specify type-name.

# Enables all traps of IPv6 module.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name ipv6