The snmp-agent trap enable feature-name l2if command enables the trap function for the L2IF module.
The undo snmp-agent trap enable feature-name l2if command disables the trap function for the L2IF module.
By default, the trap function is disabled for the L2IF module.
snmp-agent trap enable feature-name l2if [ trap-name { hwslotmaclimitnumfallingthreshold | hwslotmaclimitnumraisingthreshold } ]
undo snmp-agent trap enable feature-name l2if [ trap-name { hwslotmaclimitnumfallingthreshold | hwslotmaclimitnumraisingthreshold } ]
Parameter |
Description |
Value |
|---|---|---|
trap-name |
Enables or disables the trap function for the specified event. |
- |
hwslotmaclimitnumfallingthreshold |
Sends a Huawei proprietary trap when the number of MAC addresses dynamically learnt through the Slot falls below the lower limit. |
- |
hwslotmaclimitnumraisingthreshold |
Sends a Huawei proprietary trap when the number of MAC addresses dynamically learnt through the Slot exceeds the upper limit. |
- |
When the trap function is enabled, the device generates traps during running and sends traps to the NMS through SNMP. When the trap function is not enabled, the device does not generate traps and the SNMP module does not send traps to the NMS.
You can specify trap-name to enable the trap function for one or more events.