snmp-agent trap enable feature-name l3mb

Function

The snmp-agent trap enable feature-name l3mb command enables the trap function for the L3MB module.

The undo snmp-agent trap enable feature-name l3mb command disables the trap function for the L3MB module.

By default, the trap function is enabled for the L3MB module.

Format

snmp-agent trap enable feature-name l3mb [ trap-name { hwboardipv6aclreslack | hwboardl3aclreslack | hwboardl3fwdreslack | hwboardl3fwdreslackresume | hwboardl3ndreslack | hwboardservicefailed | hwfwdentryconflict | hwfwdentryconflictresume | hwBoardL3ResFull | hwBfdConfigIntervalShort } ]

undo snmp-agent trap enable feature-name l3mb [ trap-name { hwboardipv6aclreslack | hwboardl3aclreslack | hwboardl3fwdreslack | hwboardl3fwdreslackresume | hwboardl3ndreslack | hwboardservicefailed | hwfwdentryconflict | hwfwdentryconflictresume | hwBoardL3ResFull | hwBfdConfigIntervalShort } ]

Parameters

Parameter	Description	Value
trap-name	Indicates the trap function for a specified event.	-
hwboardipv6aclreslack	Indicates the trap that the IPv6 service is abnormal because ACL resources are insufficient.	-
hwboardl3aclreslack	Indicates the trap that the Layer 3 service is abnormal because ACL resources are insufficient.	-
hwboardl3fwdreslack	Indicates the trap that the Layer 3 resource usage reaches or exceeds the upper threshold.	-
hwboardl3fwdreslackresume	Indicates the trap that when the Layer 3 resource usage falls below the lower threshold.	-
hwboardl3ndreslack	Indicates the trap that ND entries fail to be saved because of a hash conflict.	-
hwboardservicefailed	Indicates the trap that the switch fails to run globally delivered commands because Layer 2 user entry resources on the switch are insufficient.	-
hwfwdentryconflict	Indicates the trap that the switch detected an anomaly when periodically checking l3-forward-entries.	-
hwfwdentryconflictresume	Indicates the trap that the switch detected that l3-forward-entries return to normal.	-
hwBoardL3ResFull	Indicates the trap that the layer 3 resource usage of the switch has reached 100%.	-
hwBfdConfigIntervalShort	Indicates the trap that the interval for receiving or sending BFD packets is too small, and the BFD session may flap.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

To enable the trap function for one or more events, you can specify trap-name.

Example

# Enable the system to generate a trap when the Layer 3 resource usage reaches or exceeds the upper threshold.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name l3mb trap-name hwboardl3fwdreslack