snmp-agent trap enable feature-name ldp

Function

The snmp-agent trap enable feature-name ldp command enables the trap for the MPLS LDP module.

The undo snmp-agent trap enable feature-name ldp command disables the trap for the MPLS LDP module.

By default, the trap is disabled for the MPLS LDP module.

Format

snmp-agent trap enable feature-name ldp trap-name { session-down-mib | session-pvl | session-retry | session-up-mib }

undo snmp-agent trap enable feature-name ldp trap-name { session-down-mib | session-pvl | session-retry | session-up-mib }

Parameters

Parameter	Description	Value
trap-name	Enables the trap of MPLS LDP events of a specified type.	-
session-down-mib	Enables the trap of the event that an LDP session goes Down in the MIB.	-
session-pvl	Enables the trap of the PathVectorLimitMismatch event of an LDP session. The maximum path vector value in the received message is different from the one in the local setting.	-
session-retry	Enables the trap of the event that an LDP session is reestablished.	-
session-up-mib	Enables the trap of the event that an LDP session goes Up in the MIB.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Run the snmp-agent trap enable feature-name ldp command to enable the LDP session trap. Currently, all traps of the MPLS LDP module are non-excessive trap. The frequent LDP session status changes do not trigger a large number of traps.

Example

# Enable the trap of the event that an LDP session is reestablished.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name ldp trap-name session-retry