snmp-agent trap enable feature-name mpls_lspm

Function

The snmp-agent trap enable feature-name mpls_lspm command enables the trap for the MPLS LSPM module.

The undo snmp-agent trap enable feature-name mpls_lspm command disables the trap for the MPLS LSPM module.

By default, the trap is disabled for the MPLS LSPM module.

Format

snmp-agent trap enable feature-name mpls_lspm [ trap-name trapname ]

undo snmp-agent trap enable feature-name mpls_lspm [ trap-name trapname ]

Parameters

Parameter	Description	Value
trap-name trapname	Enables the trap of MPLS events of a specified type.	hwmplsdynamiclabelthresholdexceed: Dynamic label usage reached the upper limit. hwmplsdynamiclabelthresholdexceedclear: Dynamic label usage reached the lower limit. hwmplsdynamiclabeltotalcountexceed: Dynamic label usage reached 100%. hwmplsdynamiclabeltotalcountexceedclear: Dynamic label usage fell to 95%. hwmplsexttunneldown: Enables the trap of the event that the TE tunnel changes to Down. hwmplsexttunneldownclear: Enables the trap of the event that the TE tunnel Down alarm was cleared. hwmplsldpvirtualtunneldown: Enables the trap of the event that an LDP virtual tunnel goes Down. hwmplsldpvirtualtunnelup: Enables the trap of the event that an LDP virtual tunnel goes Up. hwmplslspthresholdexceed: Enables the function to generate an alarm if the number of LSPs exceeds the alarm threshold. hwmplslspthresholdexceedclear: Enables the function to clear an alarm if the number of LSPs falls below the alarm threshold. hwmplslsptotalcountexceed: Enables the function to generate an alarm if the number of LSPs exceeds the maximum limit. hwmplslsptotalcountexceedclear: Enables the function to clear an alarm if the number of LSPs falls below the maximum limit. hwmplsresourcethresholdexceed: Enables the function to generate an alarm if the number of used MPLS resources exceeds the alarm threshold. hwmplsresourcethresholdexceedclear: Enables the function to clear an alarm if the number of used MPLS resources falls below the alarm threshold. hwmplsresourcetotalcountexceed: Enables the function to generate an alarm if the number of used MPLS resources exceeds the maximum limit. hwmplsresourcetotalcountexceedclear: Enables the function to clear an alarm if the number of used MPLS resources falls below the maximum limit. hwmplsstaticcrlspdown: Enables the private trap of the event that a static CR-LSP goes Down. hwmplsstaticcrlspup: Enables the private trap of the event that a static CR-LSP goes Up. hwmplsstaticlspdown: Enables the private trap of the event that a static LSP goes Down. hwmplsstaticlspup: Enables the private trap of the event that a static LSP goes Up. hwmplsteautotunneldownclear: Enables the trap of the event that the TE Auto tunnel Down alarm was cleared. hwmplsteautotunnelprimarydownclear: Enables the trap of the event that the Down alarm about the primary LSP in the TE Auto tunnel was cleared. hwmplstefrrprotaval: Enables the trap of the TE FRR bypass tunnel binding event. hwmplstefrrprotnotaval: Enables the trap of the TE FRR bypass tunnel unbinding event. hwmplstefrrresume: Enables the private trap of the event of TE FRR fault recovery. hwmplstefrrswitch: Enables the private trap of the event of TE FRR protection switching. hwmplstunnelbbresume: Enables the trap of main LSP of tunnel resumes from backup LSP in BBK. hwmplstunnelbbswitch: Enables the trap of main LSP of tunnel switches to backup LSP in BBK. hwmplstunnelbesteffortdown: Enables the trap of the event that the best-effort LSP of the tunnel changes to Down. hwmplstunnelbesteffortup: Enables the trap of the event that the best-effort LSP of the tunnel changes to Up. hwmplstunnelchangebw: Enables the private trap of the event that the tunnel bandwidth changes. hwmplstunnelcommitlost: The configuration of an MPLS TE tunnel was not committed. hwmplstunnelcommitlostclear: The configuration of all MPLS TE tunnel were committed. hwmplstunneldelete: Enables the function to generate an alarm if an MPLS TE tunnel is deleted. hwmplstunnelhotstandbydown: Enables the trap of the event that the hot-standby LSP of the tunnel changes to Down. hwmplstunnelhotstandbyresume: Enables the trap of the event that when the primary LSP went Up and traffic was switched back from the hot-standby LSP to the primary LSP. hwmplstunnelhotstandbyswitch: Enables the trap of the event that when the primary LSP went Down and traffic was switched to a hot-standby LSP. hwmplstunnelhotstandbyup: Enables the trap of the event that the hot-standby LSP of the tunnel changes to Up. hwmplstunnelhsbresume: Enables the private trap of the event that traffic switches from the hot-standby CR-LSP to the primary CR-LSP. hwmplstunnelhsbswitch: Enables the private trap of the event that traffic switches from the primary CR-LSP to the hot-standby CR-LSP. hwmplstunnelobresume: Enables the private trap of the event that traffic switches from the ordinary backup CR-LSP to the primary CR-LSP. hwmplstunnelobswitch: Enables the private trap of the event that traffic switches from the primary CR-LSP to the ordinary backup CR-LSP. hwmplstunnelordinarydown: Enables the trap of the event that the ordinary LSP of the tunnel changes to Down. hwmplstunnelordinaryup: Enables the trap of the event that the ordinary LSP of the tunnel changes to Up. hwmplstunnelprimarydown: Enables the trap of the event that the primary LSP of the tunnel changes to Down. hwmplstunnelprimaryup: Enables the trap of the event that the primary LSP of the tunnel changes to Up. mplstunneldown: Enables the trap of the event that a tunnel goes Down. mplstunnelreoptimized: Enables the trap of the tunnel reoptimization event. mplstunnelrerouted: Enables the trap of the tunnel reroute event. mplstunnelup: Enables the trap of the event that a tunnel goes Up. mplsxcdown: Enables the trap of the event that an LSP goes Down. mplsxcup: Enables the trap of the event that an LSP goes Up.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Run the snmp-agent trap enable feature-name mpls_lspm command to enable the MPLS LSPM module trap. Except mplsxcup and mplsxcdown, all traps of the MPLS LSPM module are non-excessive trap messages.

Example

# Enables the trap of the event that a tunnel goes Up.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name mpls_lspm trap-name mplstunnelup