snmp-agent trap enable feature-name mpls_rsvp

Function

The snmp-agent trap enable feature-name mpls_rsvp command enables the trap for the MPLS RSVP module.

The undo snmp-agent trap enable feature-name mpls_rsvp command disables the trap for the MPLS RSVP module.

By default, the trap is disabled for the MPLS RSVP module.

Format

snmp-agent trap enable feature-name mpls_rsvp [ trap-name trap-name ]

undo snmp-agent trap enable feature-name mpls_rsvp [ trap-name trap-name ]

Parameters

Parameter	Description	Value
trap-name trap-name	Enables or disables a trap of the specified name. NOTE: If trap-name is not specified, all traps of the MPLS RSVP module will be enabled or disabled.	The value can be: hwrsvpteauthfail: RSVP authentication failed. hwrsvpteauthsuccess: RSVP authentication succeeded. hwrsvptehellolost: The RSVP neighbor relationship was interrupted. hwrsvptehellolostrecovery: The device is restored from the status of interruption of RSVP neighbor relationship. hwrsvpteifnbrthresholdexceed: The proportion of configured RSVP neighbors to RSVP neighbors supported by a device reaches the upper alarm threshold. hwrsvpteifnbrthresholdexceedclear: The proportion of configured RSVP neighbors to RSVP neighbors supported by a device falls below the lower threshold. hwrsvpteifnbrtotalcountexceed: The number of configured RSVP neighbors on a device reaches the maximum number of RSVP neighbors supported by the device. hwrsvpteifnbrtotalcountexceedclear: The number of configured RSVP neighbors on a device falls below the maximum limit of RSVP neighbors.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If you run this command without specifying the parameter trap-name, all traps of the MPLS RSVP module will be enabled or disabled.

After the configurations are complete, run the display snmp-agent trap feature-name mpls_rsvp all command to check whether all traps of the MPLS RSVP module are enabled.

Example

# Enable the trap of the event that RSVP authentication failed.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name mpls_rsvp trap-name hwrsvpteauthfail