snmp-agent trap enable feature-name trunk

Function

The snmp-agent trap enable feature-name trunk command enables the trap function for the Trunk module.

The undo snmp-agent trap enable feature-name trunk command disables the trap function for the Trunk module.

By default, the trap function is disabled for the Trunk module.

Format

snmp-agent trap enable feature-name trunk [ trap-name { hwextallmemberdownnotify | hwextallmemberdownresume | hwextlinkdown | hwextlinkup } ]

undo snmp-agent trap enable feature-name trunk [ trap-name { hwextallmemberdownnotify | hwextallmemberdownresume | hwextlinkdown | hwextlinkup } ]

Parameters

Parameter	Description	Value
trap-name	Enables the traps of Trunk events of specified types.	-
hwextallmemberdownnotify	Enables the device to send trap when the all member interfaces of a Trunk interface become Down.	-
hwextallmemberdownresume	Enables the device to send trap when at least one of the member interfaces of a Trunk interface becomes Up.	-
hwextlinkdown	Enables the device to send trap when the status of the link protocol on the interface became Down.	-
hwextlinkup	Enables the device to send trap when the status of the link protocol on the interface became Up.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The Trunk module is not configured with the function of excessive traps. To enable the traps of one or more events, you can specify trap-name.

Example

# Enables the device to send trap when the status of the link protocol on the interface became Down.

<HUAWEI> system-view

[HUAWEI] snmp-agent trap enable feature-name trunk trap-name hwextlinkdown