snmp-agent trap enable feature-name uni-topomng

Function

snmp-agent trap enable feature-name uni-topomng command enables the trap function for the UNI-TOPOMNG module.

undo snmp-agent trap enable feature-name uni-topomng command disables the trap function for the UNI-TOPOMNG module.

By default, the trap function is enabled for the UNI-TOPOMNG module.

This command can only be executed on a parent switch.

Format

snmp-agent trap enable feature-name uni-topomng [ trap-name { hwtopomnglinkabnormal | hwtopomnglinknormal } ]

undo snmp-agent trap enable feature-name uni-topomng [ trap-name { hwtopomnglinkabnormal | hwtopomnglinknormal } ]

Parameters

Parameter	Description	Value
trap-name	Enables or disables the trap function for the specified event.	-
hwtopomnglinkabnormal	Enables the trap function when a connection fault occurs.	-
hwtopomnglinknormal	Enables the trap function when the connection status becomes normal.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

When the trap function is enabled, the device generates traps during running and sends traps to the NMS through SNMP. When the trap function is not enabled, the device does not generate traps and the SNMP module does not send traps to the NMS.

You can specify trap-name to enable the trap function for one or more events.

Example

# Enable the hwtopomnglinkabnormal trap of the UNI-TOPOMNG module.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name uni-topomng trap-name hwtopomnglinkabnormal