The snmp-agent trap enable feature-name vbst command enables the trap function for the VBST module.
The undo snmp-agent trap enable feature-name vbst command disables the trap function for the VBST module.
By default, the trap function is disabled for the VBST module.
snmp-agent trap enable feature-name vbst [ trap-name { hwvbstpvnumexceeded | hwvbstpvnumresumed | hwVbstInvalidPV | hwVbstTrunkPVNumExceeded | hwVbstTrunkPVNumResumed | hwvbstrspancfgconflict } ]
undo snmp-agent trap enable feature-name vbst [ trap-name { hwvbstpvnumexceeded | hwvbstpvnumresumed | hwVbstInvalidPV | hwVbstTrunkPVNumExceeded | hwVbstTrunkPVNumResumed | hwvbstrspancfgconflict } ]
| Parameter | Description | Value |
|---|---|---|
| trap-name | Enables the traps of VBST events of specified types. | - |
| hwvbstpvnumexceeded | Enables the device to send trap when the number of interfaces and VLANs participating in VBST calculation exceeded the maximum number of interfaces and VLANs allowed by VBST. | - |
| hwvbstpvnumresumed | Enables the device to send trap when the number of interfaces and VLANs participating in VBST calculation falls below 95% of the maximum number of interfaces and VLANs allowed by VBST. | - |
| hwVbstInvalidPV | Enables the device to send trap when the number of VLANs that do not participate in calculation in the VBST BPDUs received by the interface exceeds the threshold. | - |
| hwVbstTrunkPVNumExceeded | Enables the device to send trap when the number of PVs of the Eth-Trunk exceeds the maximum value. | - |
| hwVbstTrunkPVNumResumed | Enables the device to send trap when the number of PVs of the Eth-Trunk is restored to be within the allowed range. | - |
| hwvbstrspancfgconflict | Enables the device to send trap when the device in VBST mode and the Eth-Trunk configuration conflicts with the remote observing port configuration |
- |