The snmp-agent trap enable feature-name vplsoam command enables the trap function of the VPLS OAM module.
The undo snmp-agent trap enable feature-name vplsoam command disables the trap function of the VPLS OAM module.
By default, the trap function of the VPLS OAM module is disabled.
snmp-agent trap enable feature-name vplsoam [ trap-name { hwlsppingipv4vpnprobe | hwlspvpingprobe | hwlspvtraceprobe } ]
undo snmp-agent trap enable feature-name vplsoam [ trap-name { hwlsppingipv4vpnprobe | hwlspvpingprobe | hwlspvtraceprobe } ]
| Parameter | Description | Value |
|---|---|---|
| trap-name | Name of a trap | - |
| hwlsppingipv4vpnprobe | A LSP ping ipv4-vpn test trap | - |
| hwlspvpingprobe | A LSP ping test trap | - |
| hwlspvtraceprobe | A LSP trace test trap | - |
Usage Scenario
The snmp-agent trap enable feature-name vplsoam command enables or disables the ping test trap (hwlspvpingprobe) or trace test trap (hwlspvtraceprobe) function. After the snmp-agent trap enable feature-name vplsoam command is run, a device receiving an LSP ping or lSP trace packet in reply mode 1 will send the ping test or trace test trap message to the NMS.