The speed command configures the baud rate for serial communications on an IoT card slot.
The undo speed command restores the configured baud rate to the default value.
By default, the baud rate is 115,200 bit/s.
speed speed-value
undo speed
Parameter
Description
Value
Specifies the baud rate for serial communication on an IoT card slot.
The unit is bit/s and the value can be:
9600 bit/s
19200 bit/s
38400 bit/s
57600 bit/s
115200 bit/s
Serial profile view
2: Configuration level
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.