speed (user interface view)

Function

The speed command sets the data transfer rate of a user interface.

The undo speed command restores the default data transfer rate of a user interface.

By default, the data transfer rate is 9600 bit/s.

speed speed-value

undo speed

Parameter	Description	Value
speed-value	Specifies the data transfer rate of a user interface.	The value is expressed in bit/s. The asynchronous serial interface supports the following data transfer rates: 300 bit/s 600 bit/s 1200 bit/s 4800 bit/s 9600 bit/s 19200 bit/s 38400 bit/s 57600 bit/s 115200 bit/s

Parameter

Description

Value

speed-value

Specifies the data transfer rate of a user interface.

The value is expressed in bit/s.

The asynchronous serial interface supports the following data transfer rates:

User interface view

3: Management level

The setting is valid only when the serial port is configured to work in asynchronous mode.

# Set the data transfer rate of a user interface to 115200 bit/s.

<HUAWEI> system-view

[HUAWEI] user-interface console 0

[HUAWEI-ui-console0] speed 115200