sta-load-balance dynamic disable

Function

The sta-load-balance dynamic disable command disables the dynamic load balancing function.

The undo sta-load-balance dynamic disable command enables the dynamic load balancing function.

By default, the dynamic load balancing function is enabled.

Format

sta-load-balance dynamic disable

undo sta-load-balance dynamic disable

Parameters

None

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Static load balancing limits the maximum number of AP radios to 16 and allows only radios on the same frequency band to join a load balancing group. Additionally, a load balancing group needs to be manually specified. Dynamic load balancing overcomes the limitations of static load balancing.

After a STA connects to an AP, the AC checks whether the AP reaches the load balancing threshold, and determines whether to steer the STA to a neighboring AP that meets load balancing requirements based on the load balancing algorithm.

Example

# Disable dynamic load balancing.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic disable