sta-network-detect disable

Function

The sta-network-detect disable command disables the device from monitoring user traffic and forcibly disconnecting STAs without traffic.

The undo sta-network-detect disable command enables the device to monitor user traffic and forcibly disconnect STAs without traffic.

By default, the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic.

Format

sta-network-detect disable

undo sta-network-detect disable

Parameters

None

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

After the device is enabled to monitor user traffic and forcibly disconnect STAs without traffic, a STA meeting all the following conditions is forcibly disconnected after reassociation and going online:

The STA does not send DHCP Request messages or receive ARP Reply packets within 5s after going online.
The IP address of the STA changes after roaming.
The STA has only uplink traffic but no downlink traffic.

When you do not require user traffic monitoring or want to prevent STAs from being forcibly disconnected, run the sta-network-detect disable command.

Example

# Enable the device to monitor user traffic and forcibly disconnect STAs without traffic.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] undo sta-network-detect disable