stack-port qos schedule-profile

Function

The stack-port qos schedule-profile command applies a scheduling profile to a stack interface.

The undo stack-port qos schedule-profile command deletes a scheduling profile from a stack interface.

The following switches support this command:

S2720-EI
S5720I-SI (excluding the S5720I-10X-PWH-SI-AC and S5720I-6X-PWH-SI-AC), S5720-LI, S5720S-LI, S5720-SI, and S5720S-SI
S5730-SI and S5730S-EI
S6720-LI, S6720S-LI, S6720-SI, and S6720S-SI

Format

stack-port qos schedule-profile profile-name

undo stack-port qos schedule-profile [ profile-name ]

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a scheduling profile.	The value must be the name of an existing scheduling profile.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After the qos schedule-profile profile-name command is used to create a scheduling profile globally, run this command to apply the scheduling profile. Then the switch schedules traffic on the stack interface based on the scheduling mode defined in the scheduling profile.

Example

# Create a scheduling profile named test globally, set the queue scheduling mode to PQ, and apply the scheduling profile to the system.

<HUAWEI> system-view
[HUAWEI] qos schedule-profile test
[HUAWEI-qos-schedule-profile-test] qos pq
[HUAWEI-qos-schedule-profile-test] quit
[HUAWEI] stack-port qos schedule-profile test