stack reserved-vlan

Function

The stack reserved-vlan command configures a reserved VLAN for a stack.

By default, a stack uses VLAN 4093 as the reserved VLAN.

Format

stack reserved-vlan vlan-id

Parameters

Parameter	Description	Value
vlan-id	Specifies the ID of a reserved VLAN.	The value is an integer that ranges from 1 to 4094.

Views

System view

Default Level

3: Management level

Usage Guidelines

By default, a stack uses VLAN 4093 as the reserved VLAN. A reserved VLAN is used only to exchange stack protocol packets.

To deploy services in VLAN 4093, run the stack reserved-vlan command to change the reserved VLAN of the stack.

If the reserved VLAN is used for other services, the stack cannot be set up. You must specify an unused VLAN as the reserved VLAN for a stack.

Example

# Configure VLAN 4000 as the reserved VLAN of a stack.

<HUAWEI> system-view
[HUAWEI] stack reserved-vlan 4000
Warning: Do not frequently modify the stack reserved VLAN because it will make the stack split. Continue? [Y/N]:y