start

Function

The start command starts an eMDI instance.

Format

start

Parameters

None

Views

eMDI instance view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After an eMDI instance is created and a target flow is configured, you can run this command to start the eMDI instance to monitor quality and demarcate faults of video or audio services.

Prerequisites

A target flow has been configured for an eMDI instance using the flow ipv4 tcp or flow ipv4 udp command.

Precautions

After an eMDI instance is started, all parameters in the eMDI instance cannot be modified. To modify the parameters, run the stop command to stop the eMDI instance first.

Example

# Start eMDI instance 1.

<HUAWEI> system-view
[HUAWEI] emdi
[HUAWEI-emdi] emdi instance 1
[HUAWEI-emdi-instance-1] flow ipv4 udp source 10.0.0.1 destination 10.0.0.2
[HUAWEI-emdi-instance-1] start