statistics-task

Function

The statistics-task command creates a performance statistics task or displays the performance statistics task view.

The undo statistics-task command deletes a performance statistics task.

By default, no performance statistics task is created.

Format

statistics-task task-name

undo statistics-task task-name

Parameters

Parameter	Description	Value
task-name	Specifies the name of a performance statistics task.	The value is a string of 1 to 31 case-insensitive characters, spaces not supported. The string contains letters, digits, and underscores (_), and must start with letters or digits.

Views

PM view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A performance statistics task is the minimum statistics collection unit of PM. Before configuring the performance statistics function, run the statistics-task command to create a performance statistics task. Only one performance statistics collection interval can be configured for each performance statistics task. After a performance statistics task is configured, enable statistics counter measurement for the task.

Precautions

A maximum of 16 performance statistics tasks can be configured.
After the undo statistics-task command is run to delete a performance statistics task, performance statistics and performance statistics files of the task are deleted.

Prerequisites

The performance statistics function has been enabled using the statistics enable command.

Example

# Configure a performance statistics task named task1.

<HUAWEI> system-view
[HUAWEI] pm
[HUAWEI-pm] statistics-task task1
[HUAWEI-pm-statistics-task1]