stream-reassemble enhanced-mode

Function

The stream-reassemble enhanced-mode command enables the enhanced traffic reassembly mode.

The undo stream-reassemble enhanced-mode command disables the enhanced traffic reassembly mode.

By default, the enhanced traffic reassembly mode is disabled.

Format

stream-reassemble enhanced-mode

undo stream-reassemble enhanced-mode

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The command is used to enable the enhanced traffic reassembly mode in the bypass deployment scenario. After this mode is enabled, sequence number reassembly is supported when TCP data packets and three-way handshake packets are out of order.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

Example

# Enable the enhanced traffic reassembly mode.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] stream-reassemble enhanced-mode