stream-reassemble overlap-mode

Function

The stream-reassemble overlap-mode command configures the action for overlapping packets during TCP stream reassembly.

The undo stream-reassemble overlap-mode command restores the default action for overlapping packets during TCP stream reassembly.

By default, the action for the overlapping packets during TCP stream reassembly is preserve.

stream-reassemble overlap-mode { preserve | overwrite }

undo stream-reassemble overlap-mode

Parameter	Description	Value
preserve	Preserves overlapping packets.	-
overwrite	Overwrites overlapping packets.	-

System view

2: Configuration level

Before running this command, you must run the defence engine enable command to enable the IAE.

# Set the action for the overlapping packets during TCP stream reassembly to preserve.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] stream-reassemble overlap-mode preserve